Molded pavement
Update time:2019-11-19 14:51:38 字号：T|T
The Luxing color embossed floor consists of three materials
Luxing color reinforcement material: 30kg/ bag Waterproof color bag packaging (dosage: 3kg/ square meter)
Luxing color release powder: 15kg/ bag waterproof color bag packaging (dosage: 0.15kg/ m2)
Luxing floor protection agent: 200kg/ barrel waterproof sealing iron drum (dosage: 0.2kg/ m2)
Luxing floor mold: 1000 square meters above free use
Luxing color embossed floor ******, large quantity is preferred
Molding floor construction process:
Lift and finish → spread strengthening material → Fine finishing → Supplement strengthening material → Secondary finishing → Dispersing mold powder → Stamping ground → sealing road → washing art ground → brushing protectant → Finishing
Molding floor construction process requirements:
1, after the concrete, when the concrete initial set by the construction personnel with a large spatula on the concrete surface for light。When receiving light, attention should be paid to whether there is floating slurry on the surface. If there is excess floating slurry, it should be scraped out manually。The function of pulp extraction is to integrate the color reinforcement material with the concrete completely. If there is a large aggregate (stone) floating on the surface during the light collection process, it should be picked up。
2, when the completion of the light, the concrete begins to grasp the time of the initial setting stage is crucial。When the water on the surface of the concrete basically evaporates, but still remains wet, you can sprinkle color reinforcement。
3. Spread strengthening material and receive light
1) The first color reinforcement material should be distributed according to the quantity of the warehouse surface and the construction scope，First, about 2/3 of the amount of color reinforcement material is evenly distributed on the concrete surface，When the art floor reinforcement material absorbs the moisture of the concrete and darkens evenly，Start closing with a large spatula，At this stage, attention should be paid not to rub too much，Otherwise there may be chromatic aberration or exposure of the concrete's true color。
2) ****** Sprinkle the remaining 1/3 of the material。****** The secondary spreader or the part showing the concrete's natural color should be replenished. At this time, the color reinforcement material will also absorb water and become dark. After the surface reinforcement material is evenly moistened, use a large spatula for secondary light absorption。The purpose of the two sprinkling is to strengthen the uniform degree of coverage and penetration of the material ******。
4, spread art floor color release powder。The spreading of the release powder of color art floor should also grasp the good timing and uniformity。The release powder should be spread when preparing to start the die. Because the material is a light powder, it should be spread out of the wind and in a downwind direction。The amount of stripper powder is related to the degree of uniformity and the familiarity of the construction personnel。
5, the use of artistic floor mold to texture the floor layer。The artistic floor mold should be used together, first determine the distribution direction of the texture, choose the position and Angle of the first piece of mold, and then the other molds are placed close to the first piece of mold in turn。The color concrete art floor pressing die adopts manual pressing die. The pressing die should be operated by the better technical personnel with the consistent depth of ****** embossing and the ****** of the mold placement。
6. The construction site should be closed immediately after the texture stamping is completed to avoid irrelevant personnel straying into the work area and damaging the newly completed color ground。Damaged art floors cannot be repaired ******。
7. In theory, the art floor should be washed after 2-3 days of closure. Under normal circumstances, in order to prevent the new road surface from being polluted, the whole texture of the project should be washed after the completion of stamping。When rinsing, it is not necessary to wash all the release powder, and about 10% of the release powder color should be left, so that the artistic ground will have a good gradual effect。
8. After the color art floor ****** is dried, the construction personnel will use special protective agent to spray on the surface of the art floor, seal the ground with color and gloss treatment, and the strong visual effect of the natural stone texture of the whole art floor will appear immediately。 8.The required grade of the bottom concrete is C25 or C20, and the top is C30 or C25 mortar fine stone concrete, with a total thickness of 5-20cm。
Scope of application:
1. Municipal engineering: streets, sidewalks, road dividers, theme parks, cultural squares, landscape engineering。
2, Commerce: business building, hotel, restaurant, bar, large ******, exhibition center, supermarket, shops, parking lot。
3. Residence: apartment, villa, residential area, courtyard, garden。
4, places: parks, playgrounds, water pools, swimming pools。
5, others: industrial plants, schools, kindergartens, bus system platforms, real estate inside and outside decoration。
Luxing color reinforcement material: 30kg/ bag Waterproof color bag packaging (dosage: 3kg/ square meter)
Luxing color release powder: 15kg/ bag waterproof color bag packaging (dosage: 0.15kg/ m2)
Luxing floor protection agent: 200kg/ barrel waterproof sealing iron drum (dosage: 0.2kg/ m2)
Luxing floor mold: 1000 square meters above free use
Luxing color embossed floor ******, large quantity is preferred
| 面积 | 200 square meters | 500 square meters | 1000 square meters | 2000 square meters | 5000 square meters |
| ****** | 15元 | 12元 | 11元 | 10元 | 9元 |
Molding floor construction process:
Lift and finish → spread strengthening material → Fine finishing → Supplement strengthening material → Secondary finishing → Dispersing mold powder → Stamping ground → sealing road → washing art ground → brushing protectant → Finishing
Molding floor construction process requirements:
1, after the concrete, when the concrete initial set by the construction personnel with a large spatula on the concrete surface for light。When receiving light, attention should be paid to whether there is floating slurry on the surface. If there is excess floating slurry, it should be scraped out manually。The function of pulp extraction is to integrate the color reinforcement material with the concrete completely. If there is a large aggregate (stone) floating on the surface during the light collection process, it should be picked up。
2, when the completion of the light, the concrete begins to grasp the time of the initial setting stage is crucial。When the water on the surface of the concrete basically evaporates, but still remains wet, you can sprinkle color reinforcement。
3. Spread strengthening material and receive light
1) The first color reinforcement material should be distributed according to the quantity of the warehouse surface and the construction scope，First, about 2/3 of the amount of color reinforcement material is evenly distributed on the concrete surface，When the art floor reinforcement material absorbs the moisture of the concrete and darkens evenly，Start closing with a large spatula，At this stage, attention should be paid not to rub too much，Otherwise there may be chromatic aberration or exposure of the concrete's true color。
2) ****** Sprinkle the remaining 1/3 of the material。****** The secondary spreader or the part showing the concrete's natural color should be replenished. At this time, the color reinforcement material will also absorb water and become dark. After the surface reinforcement material is evenly moistened, use a large spatula for secondary light absorption。The purpose of the two sprinkling is to strengthen the uniform degree of coverage and penetration of the material ******。
4, spread art floor color release powder。The spreading of the release powder of color art floor should also grasp the good timing and uniformity。The release powder should be spread when preparing to start the die. Because the material is a light powder, it should be spread out of the wind and in a downwind direction。The amount of stripper powder is related to the degree of uniformity and the familiarity of the construction personnel。
5, the use of artistic floor mold to texture the floor layer。The artistic floor mold should be used together, first determine the distribution direction of the texture, choose the position and Angle of the first piece of mold, and then the other molds are placed close to the first piece of mold in turn。The color concrete art floor pressing die adopts manual pressing die. The pressing die should be operated by the better technical personnel with the consistent depth of ****** embossing and the ****** of the mold placement。
6. The construction site should be closed immediately after the texture stamping is completed to avoid irrelevant personnel straying into the work area and damaging the newly completed color ground。Damaged art floors cannot be repaired ******。
7. In theory, the art floor should be washed after 2-3 days of closure. Under normal circumstances, in order to prevent the new road surface from being polluted, the whole texture of the project should be washed after the completion of stamping。When rinsing, it is not necessary to wash all the release powder, and about 10% of the release powder color should be left, so that the artistic ground will have a good gradual effect。
8. After the color art floor ****** is dried, the construction personnel will use special protective agent to spray on the surface of the art floor, seal the ground with color and gloss treatment, and the strong visual effect of the natural stone texture of the whole art floor will appear immediately。 8.The required grade of the bottom concrete is C25 or C20, and the top is C30 or C25 mortar fine stone concrete, with a total thickness of 5-20cm。
Scope of application:
1. Municipal engineering: streets, sidewalks, road dividers, theme parks, cultural squares, landscape engineering。
2, Commerce: business building, hotel, restaurant, bar, large ******, exhibition center, supermarket, shops, parking lot。
3. Residence: apartment, villa, residential area, courtyard, garden。
4, places: parks, playgrounds, water pools, swimming pools。
5, others: industrial plants, schools, kindergartens, bus system platforms, real estate inside and outside decoration。
